METAL TREATMENT > Cutting Oils > LUBRICOOL No. 18

LUBRICOOL No. 18

(Cutting oil) Emulsifiable oil based coolant for machining and cutting operations.

Code: P01533 Category

Emulsifiable oil machining lubricant which contains lubricant additives, rust inhibitors, emulsion stabilizer and bacteriostats to assure effective cutting tool lubrication and prolonged service life.

From the Cutting Oils category, see also: LUBRICOOL No. 37.

Specifications

Application

Purpose:

LUBRICOOL No 18 is an Emulsifiable Oil base coolant used for machining and cutting operations. When mixed with water it forms a milky oil in water emulsion that provides effective lubrication and rust protection.

Advantages:

LUBRICOOL No 18 provides the following product features:

  • Oil base assures optimum lubrication
  • Water dilution provides maximum cooling efficiency
  • Inhibited to provide effective rust protection
  • Long in service life maintained by effective bacteriostats
  • Non-odorous due to careful selecting of petroleum derivatives
  • Biodegradable to permit safe and inexpensive disposal
Application:

Concentrations of LUBRICOOL No 18 will vary depending on the hardness of the metal, severity of the cut, machine speed and type of cutting tool. A general guide for use of LUBRICOOL No 18 is:

OPERATIONCONCENTRATION IN WATER
Grinding3 – 7 %
Turning
Drilling
Milling
Gear Cutting5 – 10 %
Tapping
Broaching
Reaming

NOTE: When used on aluminum the concentration should be increased.