MIL-PRF-680C TYPE II

AVIATION > Military Specifications > MIL-PRF-680C TYPE II

MIL-PRF-680C TYPE II

Complying product: SOLVENT 680 Type II
Dry Cleaning and Degreasing Solvent.

Category Military Specifications

All the products under specification MIL-PRF-680C are hydrocarbon-based solvents used as degreasers and cleaners for painted and unpainted metal surface and degreasing of machine parts in equipment maintenance.

TYPE II (low odor with high flash point solvent) is intended for use where a solvent with a higher flash point is desired. It is recommended over Type I for safety and regulatory reasons.

Specifications

Application

Advantages

MIL-PRF-680C Type II has replaced PD-680 Type II and has the following advantages:

Safe to personnel contains less than 0,01% aromatics in comparison to PD-680 Type II that contains approximately 20%.
Almost odorless.
Much safer to metals in comparison to PD-680 Type II.
More efficient.
Since it does not contain aromatics, it is much safer to the environment.
Is enlisted on the Qualified Product List (QPL) in accordance with specification MIL-PRF-680C TYPE II.
Also, meets the specification A-A-59601 TYPE II.

Product properties

Flash point oC, min 61

Distillation range oC 185-211

Kauri-butanol value 30

Copper Corrosion, max 1b

Sandwich Corrosion, max 1

Acidity Neutral

Doctor Test Negative

Aromatic content, by volume %, max 0,01

Specific Gravity 0,79 ± 0,01

Color 30

Odor Low and non-residual

Soil Cleaning efficiency, min 85%

Usage

Used neat by brush, spray or dipping. Do not rinse off allow to dry.

Note

Our company manufactures all 5 types of MIL-PRF-680C, Type I, Type II, Type III, Type IV and Type V in conformance with the specification MIL-PRF-680C.