INDUSTRY > Stainless Steel Treatment > PASSIVATING FLUID

PASSIVATING FLUID

Liquid product that creates a protective oxide layer on stainless steel surface after activation (PICKLING).

PASSIVATING FLUID is a fluid for passivating austenitic stainless steel that creates a protective oxide layer on the stainless steel surface after activation (pickling). It dissolves chloride remains from fresh water and does not create toxic air in tanks, while no further processing is needed.

PASSIVATING FLUID is used undiluted only on stainless steel, and it can also be used diluted as an aluminum cleaner.

From the Stainless Steel Treatment category, see also: PICKLING FLUID and PICKLING PASTE.

Specifications

Application

Specifications
  • ASTM-A967 TYPE VI.
  • QQ-P-35 TYPE VI.
Application

PASSIVATING FLUID is used mainly for stainless steel structures and tanks after activation (pickling), by recirculation or by spray. The passivating process with PASSIVATING FLUID is used only if the stainless steel has first been activated with PICKLING FLUID.

Directions for Use

Circulation method: This method is used mainly for pipe systems. Fill the system with cold undiluted PASSIVATING FLUID. The processing time is about 2 hours. Drain the system and rinse with water.

Spraying method: Used mainly for tanks, with acid resistant tank cleaning machines. PASSIVATING FLUID is used neat by spray for 15 minutes. Afterwards rinse with plenty of clean water.

Small parts can be passivated by dipping for approximately 1 hour.

Aluminum cleaning: For cleaning aluminum, use PASSIVATING FLUID diluted 1:1 with water. The cleaning time is about 2 hours. Rinse with plenty of clean water.

Caution

Avoid contact with skin, eyes and clothing. For further instructions refer to the Material Safety Data Sheet.